Quirks in 8.1 and newer fixed by installing a device-specific 'driver' (actually just an INF file) supplied with the VCDS installer.Īvailable now, in our store and from many of our distributors. However, there are some HID power management The HEX-V2 enumerates as an HID device and does not require a special driver. Pass-through interface and thus unlikely to be compatible with any software other than VCDS. The HEX-V2 does not have the ability to emulate a dumb serial

The HEX-V2 should be used with the latest version If you buy a second-hand HEX-USB+CAN from someone and want However, product support is provided only to the original registered user. This interface acts as a 'dongle' for VCDS, so the software should be fully functional on any PC you use with Registration is accomplished on-line using Resellers must be registered within 10-15 uses to remain functional. In most cases, interfaces purchased directly from Ross-Tech will be pre-registered. If you plan to use a desktop PC, a wireless HEX-NET interface may be a better choice. That lets you keep your diagnostic tool connected and away from the driver's feet and legs. The first thing we're going to tell you is to eliminate the extension. We do not sell or support any other brands or models of USB extensions, if you have problems when using one, The USB standardsĭo not allow for passive extension cords! We have tested many Active USB extensions and have found one that works. The cable supplied with this interface is about 6 feet long - just right for most laptops. 8.1, or 10 on a machine robust enough to support the respective operating May work but are not officially supported. Slower computers or Windows 2000, XP, and Vista We recommend at least a 1 GHz dual-core processor with 1 GB of RAM and Windows 7 or newer. Both of our current interfaces are universal on the car-side, supporting all VW/Audi Group passenger cars from 1996 to current, including k-line and CAN-Bus diagnostics. Some 1991-1994 Audi TDI engines with ECUs that communicate at 240bps. Ross-Tech can supply two different Interfaces (the hardware needed to connect a PC to your car).These are re-badged Chryslers and don't use VW's diagnostic protocols. This interface works with all diagnostic-capable VW-Audi Group passenger cars from 1990 through current, except it does NOT fully support the following vehicles:

Vcds coding download